SEE-ID 2 is driver to communicate with incoming call displays of BD Tel Corp., Ltd, in Korea. It is adaptable to SEE-ID 2 line/4 line.
<Figure 1> is read setting example of SEE-ID 2 communication driver.
|
|
| <Figure 1> Read setting example of SEE-ID 2 communication driver |
Device part of <Figure 1> input Com Port(COM1), Baud Rate(4800), Parity Bit(0), Data Bit(8), Stop Bit(1) respectively. (These setting values are fixed)
SEE-ID 2 driver's read schedule
You just write single line as READ, about SEE-ID 2 communication driver's read schedule. If communication starts, data is saved at WORD memory and STRING memory automatically.
Read schedule example)
READ,
<Table 1> is SEE-ID 2 communication driver's save address and contents for data read value.
Save Address |
Save Contents |
Data Range |
WORD memory 0 |
Use state of main wire |
Bit - 0 = Use state of main wire1 Bit - 1 = Use state of main wire2 Bit - 2 = Use state of main wire3 Bit - 3 = Use state of main wire4 |
STRING memory 0 |
State and data of main wire 1 |
HOOK ON = Phone not in use HOOK OFF = Phone in use (In case of making a call or not displaying caller) Number = Caller's phone number |
STRING memory 1 |
State and data of main wire 2 |
|
STRING memory 2 |
State and data of main wire 3 |
|
STRING memory 3 |
State and data of main wire 4 |
|
STRING memory 10 |
The latest communication data |
Classified as [???] unit |
STRING memory ~~ |
Communication data |
Classified as [???] unit |
STRING memory 99 |
The oldest communication data |
Classified as [???] unit |
| <Table 1> SEE-ID 2 communication driver's save address and contents for data read value | ||
There is no writing settings because SEE-ID 2 is read only device.
Communication connection of SEE-ID 2 uses the private cable which is supported when you buy hardware.
You have to apply for caller display service to news agency, because it is caller display device.
 |
| <Figure 4> Several model and picture of SEE ID device |